Motorcycle lambda/oxygen sensor connector plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is functional plug to use in place of the one coming from lambda/oxygen sensor wires.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This is functional plug to use in place of the one coming from lambda/oxygen sensor wires on a SWM Superdual X motorcycle. Most likely many other motorcycles are using such 4-pin connectors, AI identified it as "Sumitomo 090 Series 4-Pin Automotive Connector".
I wanted to try some things with fuel injection and did not have possibility to buy/scavenge some stock connector, but needed it "today", so modelled and 3d printed one.
The crimp terminals are roughly 4mm x 2.5mm. The details are quite fine, so ideally 0.2mm nozzle would be better, but it worked for me printed with 0.4mm nozzle, just line width reduced to 0.25mm.