Technical Drawing Caddy – Set Squares, Compass, Pencils & Fineliners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk caddy for technical drawing: slots for set squares and ruler, pencil and fineliner holes, compass pocket, tray.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A desk caddy designed for technical drawing students: everything for a drafting class in one block.
What goes where
4 slots at the back (4.4 mm wide, 36 mm deep): set squares, 30/60 triangle, ruler, protractor. Set squares up to ~130 mm stand on their edge; bigger ones stand corner-down.
5 holes Ø12 mm: pencils and mechanical pencils (lead holders).
4 holes Ø8.4 mm: fineliners, lead tubes.
Compass pocket: 30 × 30 mm, 40 mm deep.
Tray: eraser, sharpener, leads.
Debossed 1 cm tick marks on the front, just for fun.
Size: 160 × 82 × 72 mm. It fits small printers like the Prusa MINI and Bambu A1 mini.
Print settings
PLA, 0.20 mm layers, 2 walls, 10–15 % gyroid infill. No supports.
About 150–200 g, depending on infill.
Designed parametrically in code with AI assistance, checked for watertight geometry and overhangs, and rendered in Blender. The images are renders.