3018 CNC upgrade spindle mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15.01.2020: Updated a new version that lets the threaded rod coupler go into the spindle mount, to get full movement…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 823
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
15.01.2020:
Updated a new version that lets the threaded rod coupler go into the spindle mount, to get full movement on the Z axis. Also made the clamping part for the spindle a little bit longer to prevent movement in the holder.
Upgraded my 3018 CNC machine with a 500 watt 50mm spindle. And needed a new mount for it. As this motor is quite alot bigger, and longer, I decided to make a mount that lifts the spindle 10mm higher, not to loose work area :-)
All the stock hardware is used, like linear bearings and T8 nut. You also need 3 M4 bolts and nuts to tighten the spindle in the mount!
Working on a dust shoe to fit into this, so an updated version will be dropped soon for those who need that.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: Fiberlogy PLA/PETG/ABS any
Notes:
As this thing is higher at one side, it needs supports on that side, touching buildplate :-)
Category: DIY