3018 CNC upgrade spindle mount V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
15.01.2020: Updated a new version that lets the threaded rod coupler go into the spindle mount, to get full movement…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 143
- Makes
- 0
- Views
- 823
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
15.01.2020:
Updated a new version that lets the threaded rod coupler go into the spindle mount, to get full movement on the Z axis. Also made the clamping part for the spindle a little bit longer to prevent movement in the holder.
Upgraded my 3018 CNC machine with a 500 watt 50mm spindle. And needed a new mount for it. As this motor is quite alot bigger, and longer, I decided to make a mount that lifts the spindle 10mm higher, not to loose work area :-)
All the stock hardware is used, like linear bearings and T8 nut. You also need 3 M4 bolts and nuts to tighten the spindle in the mount!
Working on a dust shoe to fit into this, so an updated version will be dropped soon for those who need that.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: Fiberlogy PLA/PETG/ABS any
Notes:
As this thing is higher at one side, it needs supports on that side, touching buildplate :-)
Category: DIY