2015+ WRX Stealth AirBox Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2015+ WRX Fa20- Air Box bracket, reverse engineered from scratch. High Temperature ASA filament work best.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 2015+ WRX Fa20- Air Box bracket, reverse engineered from scratch. I added corner support to middle of bracket to reduce flex along with oval opening for mounting adjusting. Reverse engineering process using precise measurements to ensure proper fitment. May need sand or drill to adjust if car is out of position.
Install instructions:
1:Remove OEM bracket from car
2:Install new stealth bracket over existing bolts
3:Add 2 washers to the upper bracket before threading lock-nuts.
4: Add 2 washers to both sides of lower side before fitting onto airbox
5: Take 3 lock-nuts and thread onto the 3 OEM mounting points
6: Ensure airbox is secure and enjoy the stealth.
-Scanned from actual 2020 WRX mounting points.
-Bracket is universal for 2015+ models
This is the best durable filament designed for parts that you will need is ASA (Acrylonitrile Styrene Acrylate), to withstand higher temperatures and tougher outdoor conditions. ASA is a great choice when durability, heat resistance, and long-term performance are more important than using a basic PLA filament.
High Temperature filaments work best.
.2mm layer height
-120mms speed
95% flow rate
-110 bed temp
*30C+ enclosure temp
-!!NO FANS!!-