1 / 2
Print-in-Place Gimbal Gyroscope - 4 Rings, No Supports — zdjęcie 1
1 / 2

Print-in-Place Gimbal Gyroscope - 4 Rings, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four nested gimbal rings on alternating cone pivots, printed flat and already assembled. Spin the centre disc.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Four nested gimbal rings on alternating cone pivots, printed flat and already assembled. Spin the centre disc.

  • 104 mm across, 10 mm thick rings with 0.8 mm gaps

  • Cone pivots (Ø5.2 → Ø1.2) in cone sockets with 0.45 mm clearance, alternating X and Y axes

  • Rings are sized so each one clears the next when tilted: any orientation is free

How it was checked

Every pair of rings was intersected in CAD at 8 combinations of the three gimbal angles (0° to 180°): 48 checks, 0 contact.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 09 min, 44 g. Break each pivot loose gently after printing.

Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.

About this design

Checked in CAD before release (see above) and sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Giroscopio de cardán de 4 anillos con pivotes cónicos, impreso plano y ya montado; 48 pruebas de choque sin contacto. 1 h 09 min, 44 g.

العربية

جيروسكوب بأربع حلقات يطبع مسطحا ومركبا، بلا دعامات.

Tagi