1 / 2
Print-in-Place Gimbal Gyroscope - 4 Rings, No Supports — image 1
1 / 2

Print-in-Place Gimbal Gyroscope - 4 Rings, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Four nested gimbal rings on alternating cone pivots, printed flat and already assembled. Spin the centre disc.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
36
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Four nested gimbal rings on alternating cone pivots, printed flat and already assembled. Spin the centre disc.

  • 104 mm across, 10 mm thick rings with 0.8 mm gaps

  • Cone pivots (Ø5.2 → Ø1.2) in cone sockets with 0.45 mm clearance, alternating X and Y axes

  • Rings are sized so each one clears the next when tilted: any orientation is free

How it was checked

Every pair of rings was intersected in CAD at 8 combinations of the three gimbal angles (0° to 180°): 48 checks, 0 contact.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 09 min, 44 g. Break each pivot loose gently after printing.

Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.

About this design

Checked in CAD before release (see above) and sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Giroscopio de cardán de 4 anillos con pivotes cónicos, impreso plano y ya montado; 48 pruebas de choque sin contacto. 1 h 09 min, 44 g.

العربية

جيروسكوب بأربع حلقات يطبع مسطحا ومركبا، بلا دعامات.

Tags