Honeycomb Wall Organizer - Panel + Snap-In Cup and Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagon wall panel with 7 cells and accessories that press into any cell: pen cup and hook. Panels tile side by side.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hexagon wall panel with 7 cells and accessories that press into any cell: pen cup and hook. Panels tile side by side.
40 mm cells, 2.4 mm walls, 2 countersunk screw holes
Accessories: hex plug with 0.2 mm clearance and a small friction bump
Accessories print standing on a flat edge, so the cup and hook need no supports
Make your own accessory: the plug and flange are modules in the source
How it was checked
The plug was placed in a cell in CAD: no contact except the 0.1 mm friction bump.
Print settings
A1 mini, 0.20 mm, PLA, no supports: panel 56 min (41 g); cup and hook 1 h 15 min (43 g).
Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.
About this design
Checked in CAD before release (see above) and sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Panel de pared en panal con 7 celdas y accesorios a presión (vaso y gancho); sin soportes.
العربية
لوحة جدارية سداسية مع ملحقات تركب بالضغط.