1 / 2
Honeycomb Wall Organizer - Panel + Snap-In Cup and Hook — image 1
1 / 2

Honeycomb Wall Organizer - Panel + Snap-In Cup and Hook

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hexagon wall panel with 7 cells and accessories that press into any cell: pen cup and hook. Panels tile side by side.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Hexagon wall panel with 7 cells and accessories that press into any cell: pen cup and hook. Panels tile side by side.

  • 40 mm cells, 2.4 mm walls, 2 countersunk screw holes

  • Accessories: hex plug with 0.2 mm clearance and a small friction bump

  • Accessories print standing on a flat edge, so the cup and hook need no supports

  • Make your own accessory: the plug and flange are modules in the source

How it was checked

The plug was placed in a cell in CAD: no contact except the 0.1 mm friction bump.

Print settings

A1 mini, 0.20 mm, PLA, no supports: panel 56 min (41 g); cup and hook 1 h 15 min (43 g).

Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.

About this design

Checked in CAD before release (see above) and sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Panel de pared en panal con 7 celdas y accesorios a presión (vaso y gancho); sin soportes.

العربية

لوحة جدارية سداسية مع ملحقات تركب بالضغط.

Tags