Rackmounts for deskpi rackmate tt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these rackmounts for the deskpi rackmate tt and to fit raspbery pis with multiple attachments
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed and printed these rack mounts for the desk pi rack mate tt utilizing RPI and some other stuff I had laying around
it has RPI zero 2w, RPI 3b+ and a raspberry pi 5 8gb... netgear network switch and an old 1tb external HDD I use with the pi5 for jellyfin. its not the best alternative but it works.
in the file are two RPI files one labelled 3/4/5 and this is because all three boards share the same size io and hole spacing however the io is switched on both, and as the side ports are not constrained by any means there was no need to worry about that. the pi 5 file is very specific and has added cut out for a 180 degree USB adapter to hide the wires for the HDD and rout them through the back. the network switch file also has cut outs with plugs in the file to route ethernet cables from front through to the back if you do not want them hanging about.