Festool Systainer3 50x47 shims/spacers inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlay for organizing 50x47 spacers
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Are you like me working in construction? Or maybe you are a handyman? Or a skilled hobbyist? Well, then I've got something for you. Brand new inlay/organizer for 50x47 shims/spacers. They are very common size (at least in the Netherlands). If you can't buy it where you live I also included few most usefull sizes to print.
Inlay is divided in 3 parts and you will need Bambu H2 series or other printer with equivalent bed size to print it. I recomend using PET-G or better for printing inlay. Print it flat on the bed with support under the flat upper overhangs. If printing with PET-G you'll get best result with PLA support interface.
For the shims you should be fine printing with PLA.
Inlay fits quite snugly in the Festool Systainer3 (Model M112).
Additionaly you will also need flat bottom base from here: https://www.printables.com/model/447799-flat-base-for-systainer-3
I also recomend to use inside lid cover from “extra's folder” to keep everything inside in place even when you give your systainer a rough time. After fixing the cover on its place with lid pins (5 pcs.) I added (glued with superglue) a piece of 10mm tooling foam. Unfortunatly you will need even bigger printer then H2 to print the inner lid cover. I've printed mine on the modified Voron 400x400.