Print-in-Place Gear Fidget - 5 Involute Gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 20-tooth sun and four 12-tooth involute gears, printed already assembled. Turn one and all five spin.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A 20-tooth sun and four 12-tooth gears (module 2, true involute) that print already assembled. Turn one and all five spin.
Each gear turns on a pin with a 45° double-cone bulge that holds it up and down
0.2 mm backlash per flank, 0.42 mm around the pins
The five pins are joined by a spider bridged over the gears
Ø91 × 11.5 mm
How it was checked
Gears, pins and spider intersected in CAD at 4 positions of the sun: 0 contact. With the sun 0.15 mm fatter there is still 0 contact, and with the wrong tooth phase they collide, so the mesh check is real.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 53 min, 20 g.
Break the gears loose gently after printing; a bit of elephant's foot can glue them to the pins.
Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.
About this design
Designed in code and checked in CAD before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Fidget de 5 engranajes de evolvente impreso ya montado. Sin soportes: 53 min, 20 g.
العربية
لعبة تروس مطبوعة مركبة من خمسة تروس.