1 / 2
Print-in-Place Gear Fidget - 5 Involute Gears — image 1
1 / 2

Print-in-Place Gear Fidget - 5 Involute Gears

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 20-tooth sun and four 12-tooth involute gears, printed already assembled. Turn one and all five spin.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

A 20-tooth sun and four 12-tooth gears (module 2, true involute) that print already assembled. Turn one and all five spin.

  • Each gear turns on a pin with a 45° double-cone bulge that holds it up and down

  • 0.2 mm backlash per flank, 0.42 mm around the pins

  • The five pins are joined by a spider bridged over the gears

  • Ø91 × 11.5 mm

How it was checked

Gears, pins and spider intersected in CAD at 4 positions of the sun: 0 contact. With the sun 0.15 mm fatter there is still 0 contact, and with the wrong tooth phase they collide, so the mesh check is real.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 53 min, 20 g.

Break the gears loose gently after printing; a bit of elephant's foot can glue them to the pins.

Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.

About this design

Designed in code and checked in CAD before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Fidget de 5 engranajes de evolvente impreso ya montado. Sin soportes: 53 min, 20 g.

العربية

لعبة تروس مطبوعة مركبة من خمسة تروس.

Tags