1 / 1
Lightweight Laminate/Hardwood Flooring Spacer - 6 mm or 1/4 inch — zdjęcie 1

Lightweight Laminate/Hardwood Flooring Spacer - 6 mm or 1/4 inch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple, symmetric, low-profile, and lightweight 6mm or 1/4 inch spacer for floorboard installations.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

I just wanted something simple and extremely cost effective for a large home flooring project. I tried several other models on here, but they were too clumsy to use, warped off the bed while printing, or some just used up far too much material and costed more compared to what you can just buy in the store.

So this was the result, a simple and lightweight floorboard spacer that uses < 1 gram of material when printed in PLA. You can easily scale it in your slicer software to 8 mm, 5 mm, 1/2 inch, or whatever you need. 

Tagi