Wyniki wyszukiwania: laminate

Laminate Flooring Wall Spacer 8mm / 5mm

Laminate Flooring Wall Spacer 8mm / 5mm

Laminate flooring installation spacers

The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.

Vertical Stand For Laminated A4 Paper

🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed to display some information at a point of sale quickly, and only really had A4 paper and a laminator available, so I designed a rough stand and used it for the display and then came back to refine it a little. This…

Keil spacer laminate or parquet, adjustable hight, easy to print, easy to use.

Spacer laminate 7mm - 12mm

Din A4 laminated Paper Display Stand

Brand we used for laminating the Din A4 Papers: "Leitz 80 Micron Laminating Pouches"

MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support

MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support This is a simple and practical corner support designed for 18mm MDF and 18mm laminated boards . It works like a “third hand” – helping you keep panels aligned at 90° during…

Better Laminate Flooring Wall Spacer

UPDATE: After using the original spacers for a while I made an update. The drywall behind the trim was high enough that the spacer would fit under the drywall and thus the laminate not be 1/4th of an inch spaced. The updated design has a…

Router Base for Makita 3709 Laminate Trimmer

Supports required on bottom of handles Use of this base requires removal of the black factory base plate Holes are sized for M4*12 countersunk head screws and/or the factory screws for the base plate

Laminate flooring spacer

A spacer for laminate floor installation. Intended for 8mm thick laminate flooring with 8mm gap between the wall and the floor. The small tab on one end helps to remove the spacer once the floor has been installed. You can easily print…

Laminate flooring installation spacers (4mm flooring, 1in tall)

I needed spacers to accommodate 4mm rigid vinyl plank flooring, but with enough height to catch drywall with a 1/2in gap

Spacer for Parquet & Laminate Flooring

A spacer designed for parquet and laminate flooring, which will hold a 6mm gap between the flooring board and the wall. For a tighter fit between the boards you can simply tap the spacer slightly with a hammer and use it to push the…

SheetShelf: Modular Shelf for Organizing Paper, Cardstock, Laminate, etc Letter Size, 12in Size

I designed this to organize my paper for my new vinyl cutter I got. I uploaded the .step's for easy modification and measurement. You can just adjust the length of the shelf level as you need, its basically a simple extrusion, so it will…

Laminate Flooring Edge Guard

I created a floor mat for my office chair out of laminate wood flooring to protect the carpet, and needed a way to protect the exposed edges of the laminate. This particular guard is design to fit into click-together flooring with a…

Support de menu / laminated menu holder

Support de menu plastifié / laminated menu holder

Laminate flooring spacer 6mm

Intended for 8mm thick laminate flooring with 6mm gap between the wall and the floor.

Corner Clamps for 18mm Laminate Board

A practical workshop tool designed to make furniture assembly easier and more accurate. This 3D-printed corner jig is designed for 18 mm laminated chipboard and helps position and hold panels at a precise right angle during cabinet…

Laminated Picture Holder

First version was to small and didn't hold onto the laminate. Updated the version to hold onto the laminated picture and stay upright.

Laminate flooring spacer 11mm height

T-Shaped laminate floor space for expansion gap. I printed 30 of these and used two per board length and 1 per edge. You may need more, if you do just print more. My flooring was 8mm thick with 3mm underlayment. I set this up for 11mm so…

Laminated Prusa I3 Printer

This Prusa I3 implementation was build using only laminated acrylic as an alternative to 3D printed parts. You can download the entire model at GrabCad.com https://grabcad.com/library/laminated-prusa-i3-printer-1 But if you're looking…

Laminate/Vinyl Flooring Spacer

Use these spacers as a was to get your 3/8in expansion joints on all perimeters of your flooring.

Dust extraction nozzle for cutting laminate

17.5mm (11/16") laminated particle board pass through swivel for filament

This is a remix of the following: https://www.thingiverse.com/thing:1510144 IKEA Stuva enclosure porthole pass-through (with swivel filament guide) by buddyO I had already built my enclosure for Anet A8 out of laminated particle board. I…

(Bosch) Jigsaw blade storage boxes (small laminate and diverse 5x2 compartment holder)

Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…

Voron V2 laminated glass panels

This mod uses 6.4 mm laminated glass panels on the sides and top with 5mm toughened glass on the door. The door uses a Clicky-Clack door which has been adjusted for the panels and rubber. Advantages Noise reduction Heat insulation Ease of…

Holder for Laminated picture

I was missing something that could hold my laminated photos and this was my solution

GBA SP - Frame for Funnyplaying laminated IPS

I think the frame in self-expandatory. The spacer is to fill the gap between the glass-lens and the ribbon cable.

Laminate flooring wall spacers - 6 sizes

Made these spacers to finish a flooring job. Tired of the wood shims moving around!!! 1/8"- 3/16"- 1/4"- 5/16"- 7/16" sizes

10mm Spacer for laminate flooring

I needed some 10 mm spacers when fitting a laminate floor so I designed these, I printed them in PETG but PLA should be ok

Saw Gauge for parador SL3 laminate skirting

Saw Gauge for parador skirting, to cut straight and in different angles. Printed in PETG 40% infill.

Catan Resource Card Insert for Laminated Cards

Long ago we laminated our resource cards, and they've survived the years in pristine condition. This is a remix that uses the same overall dimensions and design style as the original , but opens up some interior space for laminated…

Laminated Pencil Holder

This is my first upload. Wanted to make something showcasing pattern build plates. The laminated panels are held on by CA glue.

Bracket for a Laminated Board (18 mm, 200 mm)

English 🔹 Bracket for a Laminated Board (18 mm, 200 mm) This bracket is designed to mount a laminated board with a thickness of 18 mm and a depth of 200 mm to a wall. It’s perfect for creating a stable shelf or workspace. Installation is…

Laminate tapping block

A tapping block is a specialized block used when installing laminate flooring. It is placed against the plank and struck

Laminated Paper Holder

The model I'm uploading does not have the custom branding and imagery, but is a good platform for a few words and symbols of you want to customize it. The holder itself is light, so just be mindful that you may have to resize the model up…

Laminat Ecke - Laminate corner

Wer kennt es nicht, der Bodenbelag hat nach einiger Zeit gelöst, oder bei nicht fachmännischem Verlegen gibt es einige lose Platten, die hier und da etwas verrutscht sind oder nicht mehr so fest sitzen. Da ist diese einfache, aber dennoch…

Holder for attaching a laminate board

Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf

Laminate floor bindings ends - profile 40x14

Ends for floor profiles, profiles from OBI - 40x14 mm Use mirroring tool for L/P shape. There is also uploaded tool for holding the profile during the cutting edges. Koncovka na podlahové lišty z OBI, profil 40*14mm. Category: Household

ScubaPro Trilaminate dry suit Inflator Button Replacement

Real life problem. My hobby is scubadiving with dry suit from Scubapro. My inflator button fell off and I did find any replacement parts. Has an enhanced structure, compared to original. For best print quality place vertical, print solid…

Cosmic Hourglass Laminated Bookmark

Cosmic Hourglass Laminated Bookmark

Laminate Hanger Clip -Jillis

A simple 3 part laminate clip. I needed something to hang forms on my 3D printers. After printing the parts labelled hook and pin are used to sandwich a laminate between them. I used epoxy to attach the Mount to my printer door as I…

A shelf bracket made of 16mm laminated chipboard.

A shelf bracket made of 16mm laminated chipboard. The shelf is 200mm wide and can support up to 1m of load without visible deformation. If the wall is uneven, use spacers at the bottom of the bracket. The bracket also includes decorative…

Makita 3709 Laminate Trimmer Router / 195559-1 Dust Extractor Nozzle CAMLOCK vacuum dust adaptor

This is a snug not quite friction fit model that goes over the output shaft. The shaft is made from clear acrylic which is strong until it snaps, with that in mind this is snug but not ultra tight, i will be using a 2 part glue to join it…

Car Window Hidden TPU Hook For Laminated Info Sheets For Sales, Events, etc. Fully Parametric.

Created for a friend who displays his car at classic car events. The TPU hook is sized for his window glass thickness of 4.65mm but it's not too critical. If yours is similar, then this model should do the trick. If you need a very…

Laminated Paper Sheet Door-Mounted Holder

2 parts that can be mounted to a door with command strips or any other method and can hold a standard size sheet of paper after it has been laminated. Link to public Onshape document:…

Lightweight Laminate/Hardwood Flooring Spacer - 6 mm or 1/4 inch

I just wanted something simple and extremely cost effective for a large home flooring project. I tried several other models on here, but they were too clumsy to use, warped off the bed while printing, or some just used up far too much…

Holder for attaching a laminate board

Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf

(Bosch) Jigsaw blade storage boxes (small laminate and diverse 5x2 compartment holder)

Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…

MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support

MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support This is a simple and practical corner support designed for 18mm MDF and 18mm laminated boards . It works like a “third hand” – helping you keep panels aligned at 90° during…

Laminate flooring wall spacers - 6 sizes

Made these spacers to finish a flooring job. Tired of the wood shims moving around!!! 1/8"- 3/16"- 1/4"- 5/16"- 7/16" sizes

Laminated Paper Holder

The model I'm uploading does not have the custom branding and imagery, but is a good platform for a few words and symbols of you want to customize it. The holder itself is light, so just be mindful that you may have to resize the model up…