Cat Claw Back Scratcher – Wide Scratch Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wide back scratcher with sharp cat-claw-inspired tips designed to actually scratch, not just lightly rub your back.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I designed this because I wasn't satisfied with the back scratchers I had tried before.
Most of them have small or rounded tips and only cover a narrow area.
I wanted something that could give a stronger, more satisfying scratch while covering more of the back at the same time.
The scratching head uses multiple cat-claw-inspired tips arranged across a wide curved surface.
All of the tips are positioned to make contact together, so the pressure is distributed across a larger area instead of being concentrated in only two or three points.
For me, this is the first 3D printed back scratcher I've tried that actually feels really satisfying to use.
The handle also has shaped finger grips to make it easier to hold firmly while scratching hard-to-reach areas of the back.
⚠ WARNING The claws are intentionally fairly sharp. This model was designed for people who prefer a strong scratch. If you have sensitive skin, use very light pressure at first. Do not use on irritated, injured or damaged skin.
PRINTING Designed as a simple functional print.
Recommended: PLA or PETG 3 perimeters or more 15–20% infill Check the claw tips after printing and remove any unwanted printing artifacts before use.
WHY I MADE IT I wanted:
• a wider scratching area
• more contact points
• tips that actually scratch
• a comfortable grip
• a simple design that is easy to print