Liczymy pasujące modele…
Komplement drawer divider A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer. To print For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree…
Wydruk około 6,66 €–8,14 € nettoWstępna wycena jednego wariantu
After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
Designed for the TPO 180 Ultrawide telescope, which is also called the Askar FMA180. It won't work with the new Pro version. Clamps around the reducer and the right position is at the back of that section. This give you more room for a…
Wydruk około 12,67 €–15,49 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .700", Tee Height: .280", Slot Width: .406 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 25mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 30mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .670", Tee Height: .305", Slot Width: .420 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cleans the T-Slot on a milling table extension. T-slot size: Tee Width: .836", Tee Height: .365", Slot Width: .480 Used default slicer settings for PETG material.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets. 135 degrees version of them can be found at https://www.prusaprinters.org/prints/43057-20-mm-wide-135-degrees-t-slot-angle-brackets
Especially when in use with the MMU3 community edition, there is more space to the top. A wider radius on the bowden bend leads to a smoother loading procedure, what enhances reliabilty of material changes Additionally I found it helps a…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
This is a great vortex model that is really fun to fidget around with! This is a great print that is really fun to show all the wonders of 3D printing! Its a pretty easy model to print, but if you have a printer 7 years or older, you…
This is not really a remix, but Mistertech's design formed the inspiration, so credits to him. There are so many designs already out there for headphone/headset hangers, however my son's headhone has an extremely soft headband cusion and…
One of my power strips was wider than normal on the cable end. This design expands the cable opening to just above 3cm.
These parts are designed directly on the CAD model provided by Tony from Floatwheel. These are 3D printable versions of the footpads for anyone who wants to replicate them either in the original version or in the wide version . Obviously,…
I designed this Wide Tooth Hair Comb in SOLIDWORKS for the Printables Hair Accessories contest (21/07/2023). It's an easy print, without supports, already orientated correctly, in STEP & STL & 3DM files. Design software: SOLIDWORKS…
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets. For 90 degrees versions of these brackets, see https://www.prusaprinters.org/prints/43117-20-mm-wide-90-degrees-t-slot-angle-brackets Support is not needed…
v2: Sturdier legs. Use Tinkercad to adjust diameter, # of spokes, or # legs: https://www.tinkercad.com/codeblocks/jJmyNjh8erJ?sharecode=1a5ml5Z9M7okvXvlCJasKOzuBLIufdqxqspndya6cnU This is my own design for a fermentation weight (aka,…
I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got…
Lush wide for the ADV and ADV Pro inspired by the Kush wide form and shape. This specific model is optimised for resin 3d printing. Tehre's also a model with holes to attach Dragan Streetboard Toe Hooks v2. Wedge is required when…
BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the "Double Wide" version of my structural mending plate set. At 40mm wide , these plates feature two parallel rows of holes. Why use the wide version? While the standard 20mm…
UPDATED versions with Easy-Threads available HERE I needed some simple, lightweight yet functional and robust containers for my workshop. I designed in various capacities, but all share a common diameter. One lid fits all. Notice the…
The model features 2.4mm thick walls, making it suitable for printing with 0.4mm and 0.6mm nozzles. It was designed entirely from scratch! Inspired by: [Thingiverse Design](https://www.thingiverse.com/thing:4878747) Since I required a…
After one of my mainboard fans failed I wanted to raise the KE and SE to get more clearance. This is the KE and SE wide feet version. Printed in PLA 0.16mm, 3 walls and 4top and bottom.
Fermented foods are rich in probiotics and good for your stomach. It’s simple to do and only requires 3 ingredients. Vegetables (Cabbage is most popular), Water, Salt. Nature does the rest. To make sauerkraut, you need to keep all the…
This is a wide mouth mason jar lid for 12 gauge silver rods used for making colloidal silver. I used these 9v battery connectors and alligator clips, but you can get away with only using the clips if you prefer. connectors:…
An angled deburring tool holder, optimized for AFA brand wide body deburring tool 21 blades kit. I have a limited height clearance drawer so I made this to fit in it. The holder has a slot to store the 2 small boxes of blades in it…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus
if you need to change the size of your lense STEP file available → here For the lens adapter, I'd recommend printing a layer height of 0.15 or less Logitech 270 webcam wide lens adapter with manual focus function
N-type adapter for harbor breeze solar node
ADV Lush wide fits print bed on Bambulab P1P, P1S, X1, any print bed 256x256x256mm and up. I've had good results with tree supports. Link to the original post by @Flightpack.eu, which was created in collaboration with Grimnir and…
Like the summary says. Powertec rails are considerably wider (19cm) due to the added flexable part near the blade. These are 191mm and they fit like butter. I just used some M5 x 30mm bolts because it's what I had laying around and it was…
NICHT AM AUTO EINBAUEN, ES IST EIN WITZ Ein lustiges Geschenk für eure Schrauber-Freunde BITTE NICHT EINBAUEN, DAS WÄRE WIRKLICH ZIEMLICH DUMM UND GEFÄHRLICH Tüv sagt nein DO NOT USE IT IN A CAR, ITS A JOKE Just a funny gimmic to gift to…
Organizer to fit objective cards for the board game Wyrmspan. This fits the additional 7 cards from the expansion.
Version 2: Added a version 2 because i felt like it wasn't secure enough on the extrusion. I added a spot for an M5 screw and t-nut on the top to attach to the 4040 extrusion. Remixed the original Wider Duender motor mounts for 4040 y…
Holds blades, the blade boxes for most brands, blade mount, and sheet cut blades for Roland printers & plotters, both a version with a small tray for old blades, and one without.
I used a combination of M4 and M5 flat head screws to join the arms with the basket.
Comfort Support for Ring and Pinky Fingers
A wide-mouth funnel that sits in the top of a jam jar so you can ladle in jam, chutney, pickles, soup, lentils, rice or flour without coating the rim. The short wide spout drops inside the jar and the cone rests on the rim. A tab on the…
The original version was very narrow and the tracks were falling. I fixed it.
What it is A one-piece, screw-on lid for wide-mouth (86 mm) mason jars . A hollow plunger reaches 2 in (50.8 mm) below the rim and presses on the outer edge of a standard 70 mm glass fermentation weight, so the weight can't float up and…
Remixed from https://www.thingiverse.com/thing:2258287 I wanted a mount for my Replicator 2, and wanted to build the angles into the mount itself. The original mount has been given a 5 degree down angle and a slight 5 degree turn towards…
Literally the same as the original model, except the knife slot is 2 mm wider. The knife handle is asymmetrical and the knob didn't fit correctly when the blade was fully retracted. Note that the pushfits are loose. I'm not sure if this…
A Silly Shell to fire 2 of those old Nerf N Strike whistling or Velcro darts (as well as Elite) with seperat "barrels". The original design had the "barrels" intersect meaning there would be loss of performance. Added an .3mf file with…
Replacement level for the open/close function of a Bonavita "Wide Base Porcelain Immersion Dripper" coffee maker. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 50 Filament: n/a PETG Category: Kitchen…
This is bumper u made for a fimonda carbon frame (it can be used on other brands). It is 72mm wide. I would recommend printing it in PETG or something stronger then PLA. Category: Vehicles
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
A driptray I designed myself since I didn't finde any suitable ones. It fits my sink perfectly so don't expect it to be perfect for yours. I recommend cutting the edge of one side off to print it and hold it against your sink to check! It…
Originals tolerances were too tight when printed with my current .6mm nozzle setup, so I widened the blade area by 2mm (1mm each side). This model is a bit loose (but usable) for RapidEdge serrated utlility blades, but now fits the stock…
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
This model is compatible with the lego system.
Witam! Prezentuję szeroką końcówkę odsysającą do odkurzacza marki Festool i innych z możliwością przytwierdzenia do dowolnej powierzchni. Pozdrawiam!
Wider Soulplates for Roces 5th Elements (39-40), with a bit more pronounced backside groove. Could be prettier, but it works…
K-cup extractor with built in mason jar wide mouth lid. Prints without supports.
My PC is wider than a normal desktop PC, so I needed an adapter to get my PC into the LogiLink under-desk PC mount. The wider, taller end goes straight into the bracket and an M6 nut goes into the hole so I can use the screw to clamp it.…
Make this platform as tall as you dare by editing the leg length. (Default 10cm height).
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
This a remix of the Delsol I just made it wide bodied and added a ducktail spoiler. Category: 3D Printing
This is a modified version of the original model. The original design did not utilize the weight component of the lamp mount, so I incorporated it into this version. To create it, you will first need to disassemble the lamp mount. I used…
I needed a replacement bar clamp for my SRAM flat bar shifter, and wasn't happy with how much flex I was getting with a printed one. This replaces the standard bar clamp with one that mounts to both holes in the SRAM shifter, allowing for…
Design Concept This model is designed as a customizable upgrade for ARRMA RC cars, offering both aesthetic appeal and enhanced performance with its robust frame. The coolest way to add +20mm Wide to your favortie ARRMA car! Usage Ideal…
Complete redesign of chyllds nice spool cradle. Made the opening for the spool way bigger. M3 screws are needed (at least 10mm long, but can be up to 20mm)
Based on Ear Protection Holder by @moWerk You need two 4x40 screws to mount the holder.
Could not find any easy to use, easy to make, cheap and compact viewfinder to use with Fat Shot 617 - Medium format 6x17 modular panoramic film camera so I made my own. It uses optics from a widely avaliable " wide angle 0.45x smartphone…
Another attempt to design a cheap and easy to make wide angle viewfinder for Fat Shot 617 and Fat Shot X cameras using widely avaliable parts. Less compact overall (longer but less wide and a bit heavier) but much more convenient than the…
This model is compatible with the lego system.
This model is compatible with the lego system.
I liked the LED mounts from LDO's 2.4 kit, and bought some 12mm 24V RGBW lights to put on all my printers for some status indication while also maintaining decent looking lighting. The original BOM is changed slightly, now needing 2x M3x6…
a set of short dowels to repair outdoor wooden planks with rotten screw holes. You can also use it to make clean screw holes in brand new planks. design considerations: the side flaps avoid the dowel to turn when you screw. the ribs…
Remix of the reusable spool for the Prusament Refill System with enlarged holes for the Bambu Lab AMS Lite. The new holes have a diameter of 53 mm, as the original 51 mm holes were not large enough for the Bambu Lab AMS Lite, which…
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a round opening…
This model represents a heavily modified compact city car in a widebody racing style , featuring an aggressive front splitter, flared fenders, sporty wheels, and a large rear wing. Perfect as a display model , desk decoration , or for…
I’ve been quietly obsessing over wide-brim hat laser engraving for a long time—and this is the jig I wish I had from day one. The Ultimate Hat Jig is a 3D-printable laser engraving jig designed specifically for felt and suede wide-brim…
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
Modification of original ( https://www.makeronline.com/en/model/Anycubic%20Kobra%20S1%20Poop%20Chute%20Slide%20With%20Bin/170136.html ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was…
This is a compact, stable drying stand designed specifically for Nalgene bottles , compatible with both Narrow Mouth and Wide Mouth models. Designed to promote drying while keeping a minimal footprint on your counter. The stand features a…
This is a sliding tray for the medium and tall IKEA Maximera drawers which have the upper rails. It fits the drawers sized for the 15 inch wide cabinets. The tray is split into two identical halves. Print the halves in the default…
Organizer to fit objective cards for the board game Wyrmspan. This fits the additional 7 cards from the expansion.
I edited the original clip and widened it to better fit the model and make it look nicer. Made for Personal First Aid Box
The @rpr_designs_3558885's model was a little bit too fragile and wouldn't fit my Spectrum Filament spools. I include the original description: Tired of having a drawer full of filament clips that only fit some of your spools? I designed…
The original version was very narrow and the tracks were falling. I fixed it.
A mockup LSU 4.9 wideband lambda/o2 sensor. Usufull to find the perfect location of the sensor bung when building custom exhaust on car or bike. Based on a official Bosch LSU 4.9 CAD. Only sensor tip is cut (to avoid clashing into the…
I have a 100 ft extension cord that I needed some way to better organize. I used the original version of this , but just found that for that length, it didn't quite fit well enough, too much excess pooring out from the ends because of the…
I didn’t have any foam sheets, but I had some TPU and Tinkercad! 4mm thick TPU feet for the bottom of the spool holder to replace 4mm thick foam. This may fit the original one as well, I would need to verify that though. The addition of…
I used a combination of M4 and M5 flat head screws to join the arms with the basket.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This wide pliers holder is designed for pliers with large or widely spaced handles. It is suitable for various plier types such as combination pliers or water pump pliers and provides organized wall storage using the Honeycomb Storage…
Modification of Wide version ( https://www.printables.com/model/1563709-anycubic-kobra-s1-wide-poop-chute-slide-with-bin-a ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was stealing the poop…
I found that while the other hangers were nice, I wanted something that required no supports and worked with a headband up to 2.5 inches wide. This is a simple hanger for the Ikea Skadis pegboard for headphones with that wide headband.…
I printed with Signal White PETG from Prusament. Slightly revised Brace9's remake of czargb's filament grommet to be shorter so it can be mounted on a 18mm chipboard Drill hole is unchanged at ¾" or 18mm.
![Utility Blade Storage Module Gridfinity [v2] 2mm Wider](https://media.printables.com/media/prints/1121250/images/8465419_d308793f-dda7-4cf0-b73c-26b4375bfc2f_ebbd5910-c6e0-4416-851d-cc8fa1a8ba0c/utility-blade-storage-module-gridfinity-v2-2mm-wider-remix.png)
