Ultimate Hat Jig – Wide-Brim Hat Laser Engraving Jig (STL / 3MF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Ultimate Hat Jig is a 3D-printable laser engraving jig designed specifically for felt and suede wide-brim hats,
- Ocena
- 0 / 5
- Polubienia
- 6
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Standard Digital File License
I’ve been quietly obsessing over wide-brim hat laser engraving for a long time—and this is the jig I wish I had from day one.
The Ultimate Hat Jig is a 3D-printable laser engraving jig designed specifically for felt and suede wide-brim hats, built to deliver repeatable, professional results without fighting alignment, rocking crowns, or sketchy DIY fixtures.
This is a digital download made for real-world engraving workflows.
What This Jig Fixes (and Why It Exists)
Wide-brim hats are notoriously difficult to engrave because:
The crown rocks and tilts
The brim won’t sit flat
Seam-to-seam alignment is hard to repeat
Improvised holders risk laser head crashes
This jig solves all of that with a full support platform and two interchangeable hat-holding methods, so you can choose precision or speed depending on the job.
Two Hat Ring Options (Use What Fits Your Workflow)
🔁 Ring #1 – Precision “Lock-It-In” Ring
Mounts to the XY table using M5 × 35 mm bolts (can be glued if preferred)
Hat edge tucks under the ring lip
Ideal for top engraves and seam-to-seam alignment
Best choice when alignment matters most
🧷 Ring #2 – Low-Profile “Edge-to-Edge” Pin Ring
Low profile so it won’t hit the laser head
20 mm hole spacing for pinning around the brim
Excellent for edge-to-edge designs
Designed to be glued or secured with double-sided tape
Platform Design Details
2 mm hole grid across the main surface
Anchor or pin the hat exactly where you want it
Clamp cutouts for added stability
Removable feet for a wider, more stable footprint
Platform holes allow bolting the jig to a base for bomb-proof setups
Machine Compatibility
Designed around the xTool D1
Works with most diode and CO₂ lasers with a large enough bed (min 420mm x 420mm bed)
Compatible with common laser engraving workflows and fixtures
Dimensions
Overall: 420 mm × 420 mm × 165 mm (H)
Opening: 205 mm × 175 mm
Hardware (Optional but Recommended)
Legs: 10 mm × 1" hardware
Seam supports: 5 mm × 25 mm bolt + nut
Ring #1: M5 × 35 mm bolt + nut
Print Notes
15% infill
35%+ support threshold (or manual supports) to keep dowel holes round
Designed to fit most standard engraving-friendly wide-brim hats
Assembly instructions included
Hats Used for Fit Reference
Vegan suede hat blank commonly sold for laser engraving
Hobby Lobby wide-brim hat (white) fits perfectly
Files Included (Digital Download)
✔ STL
✔ 3MF (Bambu-ready)
✔ Single leg & foot (clone as needed)
No physical product will be shipped.
Usage & License
Personal use or use in your own engraving business
You may sell the hats you engrave
Files may not be sold, shared, or redistributed
Perfect For
Laser engraving shops
Etsy sellers
DIY makers
Hat burners who want repeatable, professional results
If you build this jig, I’d love to see your setup and finished hats—drop photos, tips, or machine-specific tweaks in the comments. I’m always refining designs based on real-world feedback.
https://songdawgdesigns.com/shop
👉 Support shop designs on Etsy: https://songdawgdesigns.etsy.com