Napkin Holder with Arched Sides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Napkin holder with two arched walls and a diamond window. Holds a 40 mm stack; prints upright with no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Napkin holder with two arched walls and a diamond window. Holds a 40 mm stack; prints upright with no supports.
160 × 62 × 99 mm
40 mm gap between the walls
Diamond window with 45° sides, so nothing hangs in the air
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 53 min, 72 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Servilletero con dos paredes en arco y ventana en rombo; se imprime de pie sin soportes. Sin soportes: 1 h 53 min, 72 g.
العربية
حامل مناديل بجدارين مقوسين، يطبع دون دعامات.