Napkin Holder with Arched Sides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Napkin holder with two arched walls and a diamond window. Holds a 40 mm stack; prints upright with no supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Napkin holder with two arched walls and a diamond window. Holds a 40 mm stack; prints upright with no supports.
160 × 62 × 99 mm
40 mm gap between the walls
Diamond window with 45° sides, so nothing hangs in the air
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 53 min, 72 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Servilletero con dos paredes en arco y ventana en rombo; se imprime de pie sin soportes. Sin soportes: 1 h 53 min, 72 g.
العربية
حامل مناديل بجدارين مقوسين، يطبع دون دعامات.