Kitchen Funnel 100 mm with Air Ribs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
100 mm funnel with a 12 mm spout. Ribs on the spout let air out of the bottle so it never gurgles. Prints mouth-up.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
100 mm funnel with a 12 mm spout. Ribs on the spout let air out of the bottle so it never gurgles. Prints mouth-up.
Ø100 mouth, Ø12 spout, 83 mm tall
Cone at 48° from the bed: no supports
4 air ribs along the spout
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 54 min, 19 g.
For food contact use a food-safe filament and wash by hand.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Embudo de cocina de 100 mm con nervios en el caño para que salga el aire. Sin soportes: 54 min, 19 g.
العربية
قمع مطبخ ١٠٠ مم بأضلاع لخروج الهواء.