Kitchen Funnel 100 mm with Air Ribs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100 mm funnel with a 12 mm spout. Ribs on the spout let air out of the bottle so it never gurgles. Prints mouth-up.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
100 mm funnel with a 12 mm spout. Ribs on the spout let air out of the bottle so it never gurgles. Prints mouth-up.
Ø100 mouth, Ø12 spout, 83 mm tall
Cone at 48° from the bed: no supports
4 air ribs along the spout
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 54 min, 19 g.
For food contact use a food-safe filament and wash by hand.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Embudo de cocina de 100 mm con nervios en el caño para que salga el aire. Sin soportes: 54 min, 19 g.
العربية
قمع مطبخ ١٠٠ مم بأضلاع لخروج الهواء.