1 / 2
Sink Strainer Basket (fits Ø65-105 drains) — zdjęcie 1
1 / 2

Sink Strainer Basket (fits Ø65-105 drains)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Conical sink strainer: 3 mm holes in the floor and 24 wall slots. Seats in any drain from 65 to 105 mm. No supports.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Conical sink strainer: 3 mm holes in the floor and 24 wall slots. Seats in any drain from 65 to 105 mm. No supports.

  • Ø60 floor, Ø110 top, 28 mm deep

  • Walls at 42° from vertical, 1.8 mm thick

  • Inner 45° lip at the rim

How it was checked

Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 52 min, 17 g.

PETG handles hot water better than PLA.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Colador cónico de fregadero para desagües de 65 a 105 mm. Sin soportes: 52 min, 17 g.

العربية

مصفاة حوض مخروطية لفتحات من ٦٥ إلى ١٠٥ مم.

Tagi