Sink Strainer Basket (fits Ø65-105 drains)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Conical sink strainer: 3 mm holes in the floor and 24 wall slots. Seats in any drain from 65 to 105 mm. No supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Conical sink strainer: 3 mm holes in the floor and 24 wall slots. Seats in any drain from 65 to 105 mm. No supports.
Ø60 floor, Ø110 top, 28 mm deep
Walls at 42° from vertical, 1.8 mm thick
Inner 45° lip at the rim
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 52 min, 17 g.
PETG handles hot water better than PLA.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Colador cónico de fregadero para desagües de 65 a 105 mm. Sin soportes: 52 min, 17 g.
العربية
مصفاة حوض مخروطية لفتحات من ٦٥ إلى ١٠٥ مم.