Tower of Hanoi (5 discs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tower of Hanoi with 5 discs (Ø26-58) and a 170 mm base with three pegs. Two plates, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tower of Hanoi with 5 discs (Ø26-58) and a 170 mm base with three pegs. Two plates, no supports.
Pegs 56 mm apart: the two biggest discs never touch (54 mm)
Disc holes Ø10 on Ø8 pegs
Base 170 × 62 mm fits the A1 mini
How it was checked
Disc spacing checked: the two largest discs on neighbouring pegs leave 2 mm. Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 05 min, 36 g + 40 min, 28 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Torres de Hanói con cinco discos. Sin soportes: 1 h 05 min, 36 g + 40 min, 28 g.
العربية
لعبة برج هانوي بخمسة أقراص.