1 / 2
Tower of Hanoi (5 discs) — image 1
1 / 2

Tower of Hanoi (5 discs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tower of Hanoi with 5 discs (Ø26-58) and a 170 mm base with three pegs. Two plates, no supports.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Tower of Hanoi with 5 discs (Ø26-58) and a 170 mm base with three pegs. Two plates, no supports.

  • Pegs 56 mm apart: the two biggest discs never touch (54 mm)

  • Disc holes Ø10 on Ø8 pegs

  • Base 170 × 62 mm fits the A1 mini

How it was checked

Disc spacing checked: the two largest discs on neighbouring pegs leave 2 mm. Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 05 min, 36 g + 40 min, 28 g.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Torres de Hanói con cinco discos. Sin soportes: 1 h 05 min, 36 g + 40 min, 28 g.

العربية

لعبة برج هانوي بخمسة أقراص.

Tags