1 / 2
Metric Screw Checker M2-M10 with 80 mm Ruler — zdjęcie 1
1 / 2

Metric Screw Checker M2-M10 with 80 mm Ruler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat gauge to identify metric screws: clearance holes M2 to M10 with labels and an 80 mm ruler to read the length.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Flat gauge to identify metric screws: clearance holes M2 to M10 with labels and an 80 mm ruler to read the length.

  • Holes M2, M2.5, M3, M4, M5, M6, M8, M10 (+0.25 mm)

  • Ruler 0-80 mm with 1/5/10 mm ticks

  • 120 × 44 × 4 mm with a hanging hole

How it was checked

Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 28 min, 15 g.

Printed holes vary a little between printers: check M3 against a known screw first.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Galga para identificar tornillos métricos M2-M10 con regla. Sin soportes: 28 min, 15 g.

العربية

مقياس لتحديد البراغي المترية من M2 إلى M10.

Tagi