Metric Screw Checker M2-M10 with 80 mm Ruler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat gauge to identify metric screws: clearance holes M2 to M10 with labels and an 80 mm ruler to read the length.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Flat gauge to identify metric screws: clearance holes M2 to M10 with labels and an 80 mm ruler to read the length.
Holes M2, M2.5, M3, M4, M5, M6, M8, M10 (+0.25 mm)
Ruler 0-80 mm with 1/5/10 mm ticks
120 × 44 × 4 mm with a hanging hole
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 28 min, 15 g.
Printed holes vary a little between printers: check M3 against a known screw first.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Galga para identificar tornillos métricos M2-M10 con regla. Sin soportes: 28 min, 15 g.
العربية
مقياس لتحديد البراغي المترية من M2 إلى M10.