Counting matching models…
I wanted to make a chess set that I could take on the go. this set can be used to play chess, checkers, and backgammon. I printed it with PLA in black and white. if you print in layer height of 0.2 you can easily change color 3 layers…
Bed Level Test / Z Offset Checker (First Layer) - Fits AnkerMake M5C Perfectly.
A Large Chess Board. Print with supports from bed only (for white square overhang) Only need for centers and middle. Should remove easily. Do not use brim (because of size). I did use wind shield (extended.)You will need two (2) of each…
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
This slides over a Mini Mag-lite 2 AAA LED flashlight to project an 8x8 checkerboard pattern. This is demonstrating stereographic projection. This can project huge squares of light across a room and is fun to play with, especially when…
This turns the SliX Shotshell Checker Sizer Combo into a table or cart mounted vice to easily add to a SASS legal taper crip to your shells. Much easier than doing it by hand. As shown, printed in PETG-CF for longevity, test prints in PLA…
I designed these because I deal with lots of hex socket cap screws at my work and I wanted a faster way to find out the correct size without waltzing around looking for sockets around the shop. (I designed this because I didn't have any…
Simple chess pieces. Only the knight really needs supports. Hole in bottom for 5mm diameter magnet which would need to be glued in as designed. Create in Tinkercad.
Box GridFinity 2x3 for X-Rite Calibrite Display Pro (Color Checker) Base 2x3 Box 6 U created with gridfinity generator (https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0)
I designed these because I deal with lots of hex socket cap screws at my work and I wanted a faster way to find out the correct size without waltzing around looking for sockets around the shop. (I designed this because I didn't have any…
I am sharing the gcode I worked out for this multi-tool painted model, that started with BBprintsthings's very good Sitting Rabbit print. I made a larger and smaller version, and there is no problem at all with the scaling. I've included…
🎲 Overview Enjoy the timeless strategy of checkers with this modern 3D model set. Designed with clean lines and a minimalist style, this set offers a fresh take on the classic board game while remaining fully functional for play. ✨…
Game play: Chinese Checkers rules apply but if any corner of the board touches the table, the player needs to return their piece to its original position (where that piece was before they started their turn) then the next player starts…
This test is designed for 2mm thickness tests: You may want to increase Z dimension in slicer to test more thick designs, but generally 2 mm is fine. Does this print nicely (especially look at presence of angel hairs) with basic…
These creepers are Minecraft-inspired checkers pieces. The "Creeper Checker" is the single piece used at the beginning of the game. When you reach the end of the chessboard, it transforms into a double piece by placing the "Creeper Double…
A basic battery checker case for 2s, 3s, 4s and more battery checkers
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
4x1 Gridfinity for Park Tool CC-2 chain checker. Printed in PLA with 2xcolor change.
My pack needed a quick jig for checking Pinewood Derby car compliance. Specifically, we wanted to validate width , length , and track clearance . Here's a jig that'll help you perform these checks! Printing information: I used a 10%…
Bring a piece of modern Danish cinema to life! This is a 3D printed replica of the iconic sword from the popular Danish animated movie Ternet Ninja (Checkered Ninja) created by Anders Matthesen. This model is designed to be printed in 4…
German Mein Design dient zum Aufbewaren eines LiPo Checkers an einem Skadis Board. Ich habe den Halter in PLA mit 20% Infill und Support gedruckt. English My design is for storing a LiPo checker on a Skadis board. I printed the holder in…
A combination between a few different models that should allow for a chess checkers and backgammon box with one color. Printing The "all in one" 3mf file has all the STLs, and that can be used. For the STLs, the amount should be the…
If you wanna print a 5 mm hole you have to print it bigger, but how much ? You could check the "fit" you need for instance with a 5 mm Drill and take these numbers into your CAD Software to model your holes. With 0.2 mm Layerheight ( 0.4…
A protective case for Banggood LiPo voltage checker 1S-6S Battery Voltage Meter Checker Low Voltage Tester https://www.banggood.com/1S-6S-Battery-Voltage-Meter-Checker-Tester-Low-Voltage-Buzzer-Alarm-p-75520.html I used to buy these great…
My wife and I were in love with Fabian's tiny board games, but she's always been more of a checkers fan and there wasn't anything around that could compare, so I whipped this up from Fabian's chess board just for her because the license…
I currently use a lot of Gridfinity for my drawers. That's why I transferred one of my favorite Hanna checker cuvette holders to Gridfinity. You can find the original on Thinigiverse by pw98 .
Puzzle description: This checkerboard dissection puzzle was first published 1946 by E.M. Wyatt in his book Wonders in Wood. Put the 14 one-sided pieces together to form a 8x8 square with correct checkerboard pattern. If you can read…
Travel checkerboard. in the future I will also upload a version with chess. By closing the lid the pieces will not come out of their place, so you can continue the game wherever you want If you have the possibility to print with multiple…
This is a divider insert for an altoids tin with a magnetic spacer, so the tin can lay upside down level to use it as a chess or checkers board. The print has to be paused in order to insert a 8x3mm magnet. I included a file for the board…
This is a boardgame optimised for a prusa mini Print settings: Board: Standard settings 2 filament changes PLA Stones: Standard settings Grid of 3x3 stones PLA Happy playing! :)
Add-on for the Magnetic Chessboard with a set of checkers pieces and a matching storage box. If you like my Magnetic Chessboard and also play checkers, then this is for you. It is only 2 cm high and is attached underneath the existing…
Simple chess pieces. Only the knight really needs supports. Hole in bottom for 5mm diameter magnet which would need to be glued in as designed. Create in Tinkercad.
Assembles like a puzzle (see diagram). No glue is required. All the parts are numbered for ease of assembly. Red and white is optional :) The one in the picture is printed at 0.2 LH. A bit of support is required for the nozzle when…
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
This is a case for a USB Cable Checker model MRB063A available from many sources such as AliExpress. The top part shall be printed with is face on the bed. The 3mf file contains the top part with lettering to be printed with 2 colors. The…
I was inspired by those who have done chess pieces as impossible passthrough objects, and thought surely someone has done the same thing for checkers! Well I couldn't find any, so I decided it would be fun to come up with my own concept…
fichas de tablero o damas para jugar con tus amigos en la plaza o en tu casa board tiles or checkers to play with your friends in the square or at home
This can be printed very quickly compared to other test files out there and can be easily measured with calipers.
Game of checkers everyone knows, but it's slowly being forgotten. Printed : Bambu X1c 3 walls 25% fill Without support +Change the colours to suit you Have fun :)
Checkers Mini Game Table: 15% infill - Supports: Yes Table Checkers 100% infill - Supports: No (Glue this part) Desk Drawer: 15% infill - Supports: Yes Checkers Piece : 15% infill - Print 12 white and 12 black You can change the sizes and…
The game board can be folded into a box and then houses all the game tokens. You can use it to play Reversi/Othello or Checker. Gamebox : Insert a piece of filament into the hinge. The best time to do this is when the box is still…
Checkers Replacement Piece Diameter: 28.575mm (1 & 1/8 Inch) Crown STL Courtesy of FreePik: https://www.freepik.com/
Hello I was wanting to create a board game and thought what better one to do than the classic game of checkers. you might be wondering why it is ‘’lifted'' that is because the black pieces is higher than the white. I did that so you…
The On/Off button of the (excellent) SKS AirChecker pressure gauge is easily pressed when in your bag. This is a simple cover to protect the On/Off button. There's a little interference nub that prevents it from falling off. Check…
I wanted to compare fit and tolerance between my 3D printer and my brother's laser cutter. I also wanted a way to verify squareness. Description of Cuts: Four 1.0mm square holes print two and turn one 90 degrees to verify squareness 3mm…
Printable model of the pink trolley as part of the Checkers Little Shop collection. Supports and assembly are required.
Rules: normal checkers except you can use your dino one time to “eat” one of the other players pieces. stars vs. circles.
Gridfinity tray for the kmc chain checker caliper
After stumbling upon this amazing portable chess/checkers set on maker world I realized that it was designed for multicolored printers as the board was in one piece. I sliced the board up so it can be printed In two parts, whatever colors…
Box GridFinity 2x3 for X-Rite Calibrite Display Pro (Color Checker) Base 2x3 Box 6 U created with gridfinity generator (https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0)
Hi, I am posting a model to verify the correctness of the belt tension. This model will allow you to verify whether your printer prints circles or eggs. The model has notches to make it easier to measure the diameter. Outer diameter 120mm…
This is a reworking of https://www.printables.com/model/948066-penrose-tiling-based-on-flippable-triangles-with-h with a slightly different approach. That link has more details. The tiles are the same size, but incompatible. I have…
We have designed a complete Checkers set that includes everything you need: the checkers pieces, a checkers board that doubles as a carrying case with a simple yet functional locking mechanism, and a checkers inlay. The inlay can…
Somit ist der USB Kabel Checker etwas geschützt. Mit einem kleinen spitzen Gegenstand (z.B.: Kugelschreiber) kann man den Regler auf ON OFF schalten
Backgammon Merels Checkers Stones - Backgammon Mühle Dame Steine 28 x 7 mm
Recommended settings: 0,2mm layer hight tree supports seam position: random
Super simple and fast print that will make your life easier when doing work with a water phantom. Slot the notch over your cylindrical phantom and get a quick indication as to whether what you think is 10cm is really 10cm. This is a…
I printed with PETG. Afterwards, the housing and slide were treated with an iron and sanded a bit.
Portable Backgammon and Checkers Board that can be packed for your travels. Board is assembled into 2 halves that snap together using (Qty36) 8 x 2mm magnets for easy travel and secure game play. You will need to print 2 each of the…
This is the companion set of Checkers/Draughts to go along with the Chess Set we published here- https://www.printables.com/model/1124964-chess-set Filament colors used- Polymaker PLA Silk Champagne from the 2024 Holiday Bundle, Polymaker…
Case for preventing the chain wear indicator from being accidently bent and reading good chains as worn chains. The case uses a filament hinge. Includes a outline of the indicator to house it with the inverted image on the lid for…
I took apart some old printers and was left with a bin full of screws to sort. There are a bunch of these out there but I felt like making one for my needs. I had heat press inserts for each size, so that's what I made. The side has tick…
Classic Checkers and Backgammon chips. diametr - 20mm hight - 7mm
Pikemen pieces for "Checkers and the Pikemen" game. The pikemen moves like a pawn, but it has a long pike that covers three squares in front of the pawn. When the pawn moves, its pike moves with it. Any piece in the path of the pike is…
Meet Bobble Bot! A charming, spring-loaded miniature robot and wiggly fidget companion that fits perfectly in your hand. Optimized for 3D printing, this simple and fun fidget toy is perfect for your desk - just press its head and watch it…
A fillet gauge is a tool used to measure the radius of curved edges (fillets) to ensure accuracy and consistency. It helps check if rounded corners and smooth transitions match the intended design. Ideal for quality control,…
Saw a ceramic vase on Amazon, this is my model of something similar. Use "Modifier" object (might need to “Change Type” if you import the raw geometry) for color. Of course, MMU/AMS/CMS needed for color pattern, you could use the modifier…
The mini chess board is printed in four separate sections and then assembled similar to four puzzle pieces with interlocking tabs. Incorporate a color change at the appropriate layer in the slicer to give alternating spaces a different…
Just a simple Chessboard Will need a total of 64 Pieces ( 32 of each color ) No need for glue should snugly fit may have to use a little force to place the pieces in Actual playing pieces are in the works and I will add them to this model…
Holds the common LiPo-checker on the LiPo battery with one of the battery straps as seen on the picture. Hope you enjoy it and keep some old brushed RCs alive without the risk of ruining your LiPos.
Remixed this from Gyjofi's nice design (URUAV MC-6S battery checker box by "gyjofi" on Thingiverse). I didn't want to open a lid every time. This is a tight fit like the original design, and it covers everything except the balance pins,…
Cute cat checkers i would recommend sizing it up to about 160% to be the size of a normal checkers board.
This model is a pencil holder that allows you to test the Fuzzy Skin feature of the PrusaSlicer. You can immediately see how the surface changes with the “Fuzzy skin thickness” and “Fuzzy skin point distance” settings. G-Codes for…
I used my soldering iron to secure the two halves together, and to secure the battery plugs to the case. I also used e6000 to secure the LED panel in the front… never used a screw, but its there if you want to, m2. Keep wires short. I…
This model is shorter so it fits the air intakes and you dont need to bend it
Print both parts and then put them together. I used black PLA with 0.15 mm layer heights and a 0.4 mm nozzle printed on an MK3S+
This chain wear gauge is optimized for FDM 3D printing and includes built-in calibration features to ensure accurate measurements. It's based on the Shimano TL-CN42 and other 3-pin gauges that measure pin wear , not roller wear—an…
