1 / 5
Self-Kingable Checkers Piece [print-in-place]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Checkers piece that can king itself. Print-in-place. 32mm x 8mm.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 90
- Makes
- 1
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Why use two when one will do? King your Checkers pieces on your own.
A print-in-place design, no supports required. 32mm diameter x 8 mm height (1-¼" x ⅓").
Uses approximately 5g of filament per piece. I printed with a brim, because the outer pieces kept lifting off the plate. A brim does make it harder to take apart, as it fuses in-between the pieces, and you may need a utility knife to separate.
Two pieces can still be stacked together if you like.
Note: The black pieces in the photos are an earlier prototype. Red is the final, with 3 levels.