1 / 6
GT2 timing belt equal length checker and cutting helper — image 1
1 / 6

GT2 timing belt equal length checker and cutting helper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A little tool to keep two lengths of GT2 timing belt aligned to help cut exactly in half or match an existing length.

Rating
4.5 / 5
Likes
29
Downloads
170
Makes
3
Views
731
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Sandwich the lengths of belt together, teeth facing each other. Use the marks on top as a visual guide/reminder to decide which length of belt has the leading tooth - this is important when deciding where to cut if you need exact matching tooth count. As you pull the belts through together, the teeth stay interlocked, allowing you to check or cut to equal length even over several metres.

Accepts two M6x12 cap head screws to fix to your printer frame with suitable T-nuts during a build (this is typical RatRig hardware). Or you can clamp it in a vice.

Tested with 9mm belt, other widths should be fine.

Printing

Any non-flex, smooth material (PLA is fine). 4 or more perimeters, 25% infill. Tested with 0.2 layers and 0.4 nozzle.

There are two variants. One has extra “wings” you can use as a cutting surface.

Tags