1 / 2
Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 285
- Makes
- 4
- Views
- 947
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Checkers pieces have a habit of getting lost so secure them in this container!
Note: Not really a remix as its a new design but it was built to complement the model here so I added it as a remix so its easy to find for people.
| Print Settings | Setting |
| Walls | 2+ |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | PLA+ but most filaments will work. |
| Infill | 15% |
| Supports | None |
| Other | Print in the supplied orientation |
PS: Internal diameter is 25mm so anything with that external diameter can fit in this tube.