1 / 2
Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 285
- Wydruki
- 4
- Wyświetlenia
- 947
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (39)Powiązane
Checkers pieces have a habit of getting lost so secure them in this container!
Note: Not really a remix as its a new design but it was built to complement the model here so I added it as a remix so its easy to find for people.
| Print Settings | Setting |
| Walls | 2+ |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | PLA+ but most filaments will work. |
| Infill | 15% |
| Supports | None |
| Other | Print in the supplied orientation |
PS: Internal diameter is 25mm so anything with that external diameter can fit in this tube.