Over-Cabinet-Door Hook (16-19 mm doors)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No-screw hook that clips over a 16-19 mm cabinet door to hang towels, bags or cloths.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
No-screw hook that clips over a 16-19 mm cabinet door to hang towels, bags or cloths.
19 mm gap, 3.5 mm walls
Hook 60 mm below the top
Printed on its side for strength
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 15 min, 8 g.
Change puerta for your door thickness.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Gancho sin tornillos para puerta de armario. Sin soportes: 15 min, 8 g.
العربية
خطاف لباب الخزانة دون براغ.