1 / 5
Snow Shovel for Kids for 20 or 30 mm wood shaft — zdjęcie 1
1 / 5

Snow Shovel for Kids for 20 or 30 mm wood shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

...since its snowing and due to corona the shops are in lockdown.... ...here is a kids snow shovel fitting on a 20 mm…

Ocena
5 / 5
Polubienia
5
Pobrania
72
Wydruki
1
Wyświetlenia
419
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

...since its snowing and due to corona the shops are in lockdown....

...here is a kids snow shovel fitting on a 20 mm wood shaft.

...comes at around 500g filament when printing with the settings below and using some support.

Print Settings

Printer:

SecKit SK-Go²

Rafts:

Yes

Supports:

Yes

Resolution:

0.25

Infill:

50%

Filament:

Sunlu PLA

Grey


Notes:

I used the support blocker to reduce slightly the supported area (picture).
Also I recommend the orientation for max stability.

How I Designed This

FreeCAD

model included.
If you want to change the shaft diameter, you have to change:

the x and y scale of the clone: ISO4017-M20x60_001_adjust_Scale for Diameter

the radius1 and radius2 of the cone: Cone_adjust_Scale for Diameter

of the Shaft_Bracket part

The bracket should allow diameters up to approx. 35mm

STEP files are included if you want to use another CAD

Category: Outdoor & Garden

Tagi