Snow Shovel for Kids for 20 or 30 mm wood shaft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
...since its snowing and due to corona the shops are in lockdown.... ...here is a kids snow shovel fitting on a 20 mm…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 1
- Views
- 419
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
...since its snowing and due to corona the shops are in lockdown....
...here is a kids snow shovel fitting on a 20 mm wood shaft.
...comes at around 500g filament when printing with the settings below and using some support.
Print Settings
Printer:
SecKit SK-Go²
Rafts:
Yes
Supports:
Yes
Resolution:
0.25
Infill:
50%
Filament:
Sunlu PLA
Grey
Notes:
I used the support blocker to reduce slightly the supported area (picture).
Also I recommend the orientation for max stability.
How I Designed This
FreeCAD
model included.
If you want to change the shaft diameter, you have to change:
the x and y scale of the clone: ISO4017-M20x60_001_adjust_Scale for Diameter
the radius1 and radius2 of the cone: Cone_adjust_Scale for Diameter
of the Shaft_Bracket part
The bracket should allow diameters up to approx. 35mm
STEP files are included if you want to use another CAD
Category: Outdoor & Garden