MGN12H Carrier Belt Mount | XoL | StealthBurner | A4T
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt mount for something like an ender 3 with linear rails. Should be slim enough to work with every toolhead out there.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prerequisites: You will need an MGN12H linear rail for the X axis and at least four 15 mm M2 screws before printing this.
Print this in PETG-CF or stronger. PLA won't do.
Remove the 2 screws from both sides of your carriage. DO NOT REMOVE ANYTHING ELSE — THIS IS CRITICAL.
Place the printed belt mount over the carriage, then use the longer screws to secure everything together.
That's it.
I've used this belt mount for over 300 hours without any issues.
Print and use at your own risk.