1 / 1
72mm Screw-on Lens Cap for various Canon FD Lenses — zdjęcie 1

72mm Screw-on Lens Cap for various Canon FD Lenses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

72mm screw-on lens cap lettered for seven FD lenses

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Screw-on lens caps lettered for various Canon FD lenses with a 72mm filter thread. These are additional versions of my previous model: 

https://www.printables.com/model/1799762-72mm-screw-on-lens-cap-for-canon-fd-35-105mm-f35

Thanks to @BentlyMick_5432265, I was made aware that it would fit other lenses, so these are now lettered for seven different FD lenses.

They will work on:
FDn 17mm f4.0
FDn 20mm f2.8
FDn 24mm f1.4 L
FDn 85mm f1.2 L
FDn 20-35mm f3.5 L
FDn 24-35mm f3.5 L
FDn 35-105mm f3.5

I only have a 35-105 to test it on, but all other lenses above seem to have the same construction, so they should all work.
They might also work on the breech lock versions of these lenses.

Print at 0.1mm layer height for detail.
In Bambu slicer, you might have to enable "detect thin wall" under the strength tab for proper lettering detail on certain caps. Check on this before printing!

Tagi