E3NG-Next-V2-ITEV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification to the E3NG-Next-V2 that supports madmax docks with some extra structural improvements.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cronis released the NEXT-V2. I found some things I was not a big fan of, so I modified some things to be something I am a fan of. Original Mod: https://www.printables.com/model/1835870-e3ng-next-v2
This project adds MadMax Support, improves input shaping further, and makes the whole system stronger.
STL Files that are not here are in the original E3NG-Next-V2 and you must download them from there. The .STEP file contains the original files as well, but all parts of those original pieces are given to Cronis for Credit
Materials needed for this mod are identical to the original, plus an extra 2 screws for the frame, besides the madmax parts (if used), to which, you will need to bring at least 6 M3x8 screws and 6 heat set inserts.
Printing:
All parts get printed with standard printer part settings (check voron spec for that) Except:
BottomGantry_Left, which is printed with normal supports like so:
Rear R&L witch is printed with tree supports
Updates:
V1.1.1
Fixed Y-Endstop - Now takes 2 M2 heat set inserts and an M2x10 screw. It was too thin and broke easily
This version did not update the .step file! Only the Y-Endstop file was updated
V1.1
Added Double Shear support for long-shafted motors. Uses an F695 bearing
Added a Y-Endstop based from here
Added X-Endstop bumper on for MadMax Carriage
V1
Add Initiall
Naming: ITEV = Iterated Version
Made in OnShape Education Plan, Pictures Coming soon