Simplified Adderini M4 buffer tube for PDW stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified Adderini M4 buffer tube for PDW stock
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this somewhat shortened "buffer tube" following Mil-spec standards to match the diameter of the PDW Style stock of magno23 over at Thingiverse:
https://www.thingiverse.com/thing:3165890
I designed a front part similar to my simple M16 buffer tube using a 60 mm piece of 12 mm tube to connect to the Adderini / Mini Adder. Cut the 12 mm tube first, put it in the Adderini and drill a 3 mm hole for the mounting screw. Then glue the tube into the front part for the M16 stock using Epoxy or Super Glue.
To ensure maximum stability I would print the buffer tube at least with PLA+ and a reasonable perimeter. When using 8 mm metal rods for the PDW stock this thing is VERY sturdy.