Simplified Adderini M4 buffer tube for PDW stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simplified Adderini M4 buffer tube for PDW stock
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I designed this somewhat shortened "buffer tube" following Mil-spec standards to match the diameter of the PDW Style stock of magno23 over at Thingiverse:
https://www.thingiverse.com/thing:3165890
I designed a front part similar to my simple M16 buffer tube using a 60 mm piece of 12 mm tube to connect to the Adderini / Mini Adder. Cut the 12 mm tube first, put it in the Adderini and drill a 3 mm hole for the mounting screw. Then glue the tube into the front part for the M16 stock using Epoxy or Super Glue.
To ensure maximum stability I would print the buffer tube at least with PLA+ and a reasonable perimeter. When using 8 mm metal rods for the PDW stock this thing is VERY sturdy.