Benchy Fridge Magnet (STL, 3MF, STEP, f3d)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A functional Benchy that sticks to magnetic surfaces.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Hi,
I usually print benchies to test new challenging materials. However after a while they lay around in the house and don't fulfill any function. I wanted a to use my 7mm x 2mm magnets, so I made a fridge magnet.
I also wanted to label the material the Benchy was printed on, so that can be found in the bottom.
I used a single 7mm diameter x 2mm thickness Neodym magnet. Similar to the ones here: Neodym Scheibenmagnete Ø7x2 mm N45 1KG ► magnethandel.de
I intrducead a pause at about 19.6mm to insert the magnet.
A step file and an Autodesk Fusion native File (.f3d) are also available, to label more materials.
I would like to extend my gratitude to Daniel Norée and Stemfie3D