Herb Stripper (9 holes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull the stem through the right hole and the leaves come off. 9 holes from 2.5 to 14 mm with chamfered entries.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pull the stem through the right hole and the leaves come off. 9 holes from 2.5 to 14 mm with chamfered entries.
117 × 44 × 3.2 mm
Holes 14 to 2.5 mm
Big hole doubles as a hanging hole
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 17 min, 9 g.
For food contact use a food-safe filament.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Deshojador de hierbas. Sin soportes: 17 min, 9 g.
العربية
أداة لنزع أوراق الأعشاب.