Herb Stripper (9 holes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pull the stem through the right hole and the leaves come off. 9 holes from 2.5 to 14 mm with chamfered entries.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pull the stem through the right hole and the leaves come off. 9 holes from 2.5 to 14 mm with chamfered entries.
117 × 44 × 3.2 mm
Holes 14 to 2.5 mm
Big hole doubles as a hanging hole
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 17 min, 9 g.
For food contact use a food-safe filament.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Deshojador de hierbas. Sin soportes: 17 min, 9 g.
العربية
أداة لنزع أوراق الأعشاب.