1 / 3
FreeCAD Linear Rail Assy for 28BYJ-48 Stepper Motor — zdjęcie 1
1 / 3

FreeCAD Linear Rail Assy for 28BYJ-48 Stepper Motor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Linear rail assembly with rack & pinion drive for use with 28BYJ-48 stepper motors (with FreeCAD source)

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

The idea is taken from the "Linear Rail Assy for 28BYJ-48 Stepper Motor" by 3dStuffGuy. I like the simplicity of the model, but the author does not provide source files, so it's more like a proof-of-concept rather than a useful model for further development. I decided to make it in FreeCAD (sources are attached). My model has a larger diameter of the rails and a larger 20-teeth gear, so all the parts are not compatible with the original model.

Demo (double speed):

The source file requires installed GearWorkBench addon to create the gear and the rack in FreeCAD.

Default LINE length is only 102 mm (double CARRIAGE length), it's just to test tolerances and save plastic.

To change the length of the LINE to the real size that you need:

  1. Go to LINE - Pad. Default is 102 mm, set required length.

  2. Sketch005 and Sketch006 define the holes for LINE mounting. Change their number, dimensions and placement for your needs or remove them if you don't need any mounting holes.

  3. Go to RackGear_values. Set "Number of Teeth" parameter so that the rack is no longer than the line PAD in length (default is 32). The length of the rack is shown as the read-only "Total Length" value in the same place below (default is 100.53 mm).

  4. Select LINE and RackGear_Body together and export them to STL/STEP as a single thing. I tried to join them, but the addon re-creates RackGear_Body automatically in the root every time you change its settings, so there is no use of joining them before you set your own final settings.

To adjust rails/carriage tolerance: go to CARRIAGE - Sketch001. Default is R3.2 mm for R3 mm rails - it's rather loose for easy sliding and also to compensate possible defects of 3D printing - reduce it to 3.15 if your priner is really perfect to get less backlash.

PS: The motor is rather weak to make any serious work and it can be easily stopped with a finger press (at least the one that I have). It does move the carriage, but don't expect it to move a cow on the carriage :) Max weight that I could transport with my motor on this carriage is 1.8 KG, but I expect that it is not the limit as my motor was powered by the Arduino Nano's 4.7V instead of typical 5V. Anyway, for any serious work you need a more powerful motor.

Tagi