1 / 3
FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate — zdjęcie 1
1 / 3

FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Backing Plate for mounting a Radiomaster TX16 IPS Touchscreen into a FrSky Horus X12S Radio Transmitter

Ocena
5 / 5
Polubienia
6
Pobrania
226
Wydruki
3
Wyświetlenia
1650
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

EdgeTX, a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality.

The increased thickness of the touch enabled screen though makes it necessary to irreversibly modify parts of the Radio which I wasn't quite on board with so here's a 3D printable alternative Screen Backing Plate.

The normally single piece was split in two to avoid supports and will need to be glued back together.

Print at 0.2mm Layer Height.

Tagi