Nextruder nozzle tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to hold up to four Nextruder nozzles on the side of the CORE One or CORE One L.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The tray sits on the top bevel of the CORE One frame. There is a ledge to sit on the lip of the printers plastic window, and 2 recessed spots for a pair of 9.5mm magnets. These can be glued on or simply placed in the recesses. The tray is sized to hold four Nextruder nozzles in their original tubes. I've included a printable sleeve in case you are missing a tube. (Like I am)
I've had success using a 0.4mm nozzle, printing the tray in an upright position with painted supports below the front bar. I've also printed it on its side using a 0.8mm nozzle without supports. (see pictures) Though it is a slightly tighter fit. The sleeve can be printed on its back with no supports with any nozzle diameter.
I prefer using Prusament PETG with stock settings for my accessories, but this worked well enough in PLA with stock Generic PLA settings for both the 0.4 & 0.8 nozzles.