Nextruder nozzle tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray to hold up to four Nextruder nozzles on the side of the CORE One or CORE One L.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The tray sits on the top bevel of the CORE One frame. There is a ledge to sit on the lip of the printers plastic window, and 2 recessed spots for a pair of 9.5mm magnets. These can be glued on or simply placed in the recesses. The tray is sized to hold four Nextruder nozzles in their original tubes. I've included a printable sleeve in case you are missing a tube. (Like I am)
I've had success using a 0.4mm nozzle, printing the tray in an upright position with painted supports below the front bar. I've also printed it on its side using a 0.8mm nozzle without supports. (see pictures) Though it is a slightly tighter fit. The sleeve can be printed on its back with no supports with any nozzle diameter.
I prefer using Prusament PETG with stock settings for my accessories, but this worked well enough in PLA with stock Generic PLA settings for both the 0.4 & 0.8 nozzles.