Bookshelf Micro Rack - Blank Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blank panels from 1 cm tall to 8 cm tall for the Bookshelf Micro Rack
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
I've created a set of blank panels. from 1 cm tall to 8 cm tall (the rack uses 1 cm gaps between holes rather than standard rack units). These panels can be used to cover blanks openings or to remix for custom equipment.
A Note on the Initial Rack Assembly
The original model doesn't give much info on assembly. To do the assembly, I used:
- 16 M3 x 25mm bolts (to attach the braces)
- 8 M3 x 16mm bolts (diagonal on the faces)
- 24 M3 nuts
It looked like the braces might have been setup to use M4 bolts, but my print didn't quite fit them (could have been a small tolerance issue with my printer).
Assembling, it didn't seem like there was any difference between left and right for anything. You could just flip them around.