Bulky Case for Apple TV Siri Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Apple TV 4K 2nd Gen or of 3rd Gen
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While the Siri Remotes for the Apple TV 4K (2nd or 3rd Gen) look slick, I prefer something a bit more bulky. It's easier to hold in your hand, and it's less likely to disappear down the gap in the couch 🙂
This design for a case features a flat bottom. so the remote rests solidly on the table. It has a cutout in the rear that worked with all the USB-C cables I tried. There's a cutout on the right side for the Siri button—which I for one have never ever used.
Printing
This model is designed to be printed with TPU. I did not try to print it with any other material, and I don't know if the remote would remain properly in the case; try at your own risk.
To optimize appearance, I printed it upside down, with PLA as supports, on a Prusa INDX. I don't see a reason why it wouldn't print on other multi-material printers, such as a Prusa XL, Snapmaker, etc.
See attached Prusaslicer 3mf file for my recommended settings. Basically 0.2mm layer height, 15% cubic infill, 2 perimeters. 0mm top contact distance for snug supports.
If you like what I'm doing…
… consider buying me a coffee or joining my Printables Club